Buffing wheel for knife blade

[SHARPCO]

I need buffing wheel for knife blade. But there is a lot of materials. Cotton, jean, sisal, felt, etc...

What is the best choice?

And what compound is your recommendation?

[Mark Reich]

I use a sisal wheel and "dry" black buffing compound a lot.

"Dry" buffing compounds work great IMHO. Both black and white.

[SHARPCO]

I use a sisal wheel and "dry" black buffing compound a lot.

"Dry" buffing compounds work great IMHO. Both black and white.

Mark

I have been studying about buffing since yesterday. I read that sisal wheel & black compound is for initial rough cut. 

I'll order it and muslin wheel & green compound. 

BTW, I found this impressive video. 
https://www.youtube.com/watch?v=_3-nuwwPtpg

[Mark Reich]

I really should have quizzed you about your intentions...

A sisal wheel with black compound is considered "an initial rough cut" from a polishing perspective. "Polishing" normally means you're looking for a mirror finish. A sisal wheel with black compound will leave a "slightly foggy", polished finish.

If you're trying to get rid of scratches on a blade, you would probably be happier with something like 600 grit grease-less abrasive on a sewn cotton or denim buffing wheel.

Scotch-Brite belts are probably better at removing (and concealing) scratches on a blade, and it's as easy as changing a belt. Way safer and easier to use for most people.

[SHARPCO]

I really should have quizzed you about your intentions...

A sisal wheel with black compound is considered "an initial rough cut" from a polishing perspective. "Polishing" normally means you're looking for a mirror finish. A sisal wheel with black compound will leave a "slightly foggy", polished finish.  

If you're trying to get rid of scratches on a blade, you would probably be happier with something like 600 grit grease-less abrasive on a sewn cotton or denim buffing wheel.

Scotch-Brite belts are probably better at removing (and concealing) scratches on a blade, and it's as easy as changing a belt. Way safer and easier to use for most people.

Thank you Mark,

I have Blue & magenta Scotch-Brite belts and I love it. It makes great satin finish.