Micro-burr only in one side, and it will not flip

[BobD]

I recommend you take a look through Todd Simpsons Blog (The Science of Sharp). I’m not sure if there are rules regarding embedding links to other sites, so I won’t include it but you can find it through google. The blog is through Wordpress. As far as I’m concerned it has the most valuable information regarding sharpening and honing, it’s heavily focused on straight razors but many other topics are covered as well. He does research by evaluating edges with an electron microscope that is far and above everything else that’s out there. As far as I know he’s the only scientist operating all aspects of the tests, including the sharpening as well as offering views of the edge face up with cross sectioning. All of his articles are outstanding, make sure to read the entry in red (Simple Straight Razor Honing). You can spend a ton of time there, so much information.

Hope That Helps,
Bob

P.s. I have personally tested out some of his theories (like pre convexing on hanging denim with Flitz) and they are legit. You shouldn’t have any problem attaining HHT-4 or 5 without any fussing around back and fourth with things. It’s a recommended read even if you don’t do straight razors; it’s that good