08-13-2019, 10:30 AM
That's what we call details Sharpco! Thank you. There might be instruction found here for straight edge sharpeners; a 12 degree inclusive sharpening angle and a measurement of BESS 4. If the edge had dented during the measurement process then the reading would not have been 4 but something on the order of 100 - 1,000.
Our hat is off to BBB for engineering, by hand, an extremely sharp edge that seems to demonstrate a degree of useful utility as well.
Our hat is off to BBB for engineering, by hand, an extremely sharp edge that seems to demonstrate a degree of useful utility as well.