03-14-2019, 11:00 AM
I came up with a simple way to "grade" the OD.
I took my self designed knife support mounted on the Tormek USB, turned it over, wrapped 60 grit paper to it, so the flat side was just off the wheel. I then turned on the machine, and slowly lowered the device to the wheel, using the adjustment screw on the USB...... sanding out the high spots!
I wont know till tomorrow how much it improved things....as I had to re-treat the wheels with diamond paste...but we will see....
Thank all for the help.....
Sam
I took my self designed knife support mounted on the Tormek USB, turned it over, wrapped 60 grit paper to it, so the flat side was just off the wheel. I then turned on the machine, and slowly lowered the device to the wheel, using the adjustment screw on the USB...... sanding out the high spots!
I wont know till tomorrow how much it improved things....as I had to re-treat the wheels with diamond paste...but we will see....
Thank all for the help.....
Sam