01-08-2019, 10:27 AM
Sharpco, as I recall, you are presently using a fixed speed motor in your Viel. If, by chance, your motor should burn out, possible, but not very likely, replacement fixed speed motors are very readily available. If necessary, you should be able to quickly replace your motor.
For the record, the 1/4hp fixed speed motor I purchased from Viel shorted out during my conversion process. I have no idea whether the failure was due to something I might have done or a problem in the motor itself.
Apparently Penn State being out of stock with the variable speed motors is not uncommon. Patience is required.
Ken
For the record, the 1/4hp fixed speed motor I purchased from Viel shorted out during my conversion process. I have no idea whether the failure was due to something I might have done or a problem in the motor itself.
Apparently Penn State being out of stock with the variable speed motors is not uncommon. Patience is required.
Ken