03-25-2017, 08:21 PM
Here is my cart of heat treating equipment. I should have removed the Mapp torches and replaced them with the two small burners I just got from Rex Price's son, Jared, at; hybridburners.com
The difference is about 1,000*F/burner!
On top is an "18 inch Evenheat" (the exterior measurement is 18", usable length about 10", and it's UNeven heat)
Next, we have a real kiln. A new (as in "the first one sold") 24" Paragon. It's 24" on the inside, and has elements on the ceiling, so I can go at an angle and get over 24". Touch screen control like never before. I'm the new Paragon spokesman.
Down below is an industrial, cast iron, OMG, propane double burner, with 5 gallons of Park quench oil on each burner.
The space was "to fit".... without the LP tank or stack of firebrick.
![[Image: IMG_0656_zpsfyna2fyk.jpg]](http://i260.photobucket.com/albums/ii10/ytreich/IMG_0656_zpsfyna2fyk.jpg)
![[Image: IMG_0654_zpsihjvrsfe.jpg]](http://i260.photobucket.com/albums/ii10/ytreich/IMG_0654_zpsihjvrsfe.jpg)
![[Image: IMG_0651_zpskv7qj2ci.jpg]](http://i260.photobucket.com/albums/ii10/ytreich/IMG_0651_zpskv7qj2ci.jpg)
The difference is about 1,000*F/burner!
On top is an "18 inch Evenheat" (the exterior measurement is 18", usable length about 10", and it's UNeven heat)
Next, we have a real kiln. A new (as in "the first one sold") 24" Paragon. It's 24" on the inside, and has elements on the ceiling, so I can go at an angle and get over 24". Touch screen control like never before. I'm the new Paragon spokesman.
Down below is an industrial, cast iron, OMG, propane double burner, with 5 gallons of Park quench oil on each burner.
The space was "to fit".... without the LP tank or stack of firebrick.