03-25-2017, 04:45 PM
As you're aware, heat treating is an enormous subject. Specific heat treat information is readily available. You read as much as you can stand, then try to find some middle ground from which to begin.
This will help more than anything I could possibly say in a post.
Here's a Link to a lot of general information on heat treating.
Here's a Link to a great HT reference. Lots of guys look here first, because Kevin put a lot of information in one, easy to find, place.
Here's a Link to the interactive steel chart. There's a little search bar at the top of the chart so you can type in any steel you want, and you'll get the alloying elements.
I'll try to field questions.
This will help more than anything I could possibly say in a post.
Here's a Link to a lot of general information on heat treating.
Here's a Link to a great HT reference. Lots of guys look here first, because Kevin put a lot of information in one, easy to find, place.
Here's a Link to the interactive steel chart. There's a little search bar at the top of the chart so you can type in any steel you want, and you'll get the alloying elements.
I'll try to field questions.