Salutations to Stone Sharpeners!

[Rupert Lucius]

the issue is resharpening and touching up.  with a belt sander you usually end up with a convex edge that will work well but can't be fixed on a stone.  i sharpen with the sander till i can cleanly cut copy paper then finish on stones

Is your edge convex if you work ON the platen?

Touching up do you go direct to the Atoma 140? (per Mark R.)

Maybe Mark will come by and get me straightened out or lined out.  Again you have a great machine for sure in ref to FPM (belt travel).

Rupert