12-11-2017, 08:34 PM
In the top image of the flat side of the edge, it look like the edge has rolled and that the roll has been pushed away from the camera. That's why you see a clean straight edge with the rounded roll that becomes more out of focus. It's out of focus because the depth of field is very shallow and the roll of metal is below (away from the camera).
On the bottom image, it looks like the other side of the roll of metal. You can see how it is rounded and folded down over the bevel. In the lower image, the clean, perfectly edge is gone because the roll of metal is pushed down over the bevel.
This is just an educated guess. I've seen quite a few images like this one and it's just my best guess that's what is going on. Of course it would be the first time in my life, but I could be wrong.
Does that explanation of what we are seeing make sense to you too?
On the bottom image, it looks like the other side of the roll of metal. You can see how it is rounded and folded down over the bevel. In the lower image, the clean, perfectly edge is gone because the roll of metal is pushed down over the bevel.
This is just an educated guess. I've seen quite a few images like this one and it's just my best guess that's what is going on. Of course it would be the first time in my life, but I could be wrong.
Does that explanation of what we are seeing make sense to you too?